Protokollanalyse - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
LOGGer:SLOT:ACTive?
Returns the active, loaded slot. In stop mode, the loaded (active) slot and selected
(current) slot can differ. In run mode, the slots are the same, and this command shows
the same as LOGGer:SLOT:CURRent.
Rückgabewerte:
<LoadedSlot>
Verwendung:
LOGGer:SLOT:EXPort:NAME <Name>
Sets the filename, file format and path to save the logger record.
Parameter:
<Name>
LOGGer:SLOT:EXPort:SAVE
Saves the logger record of the active slot to the file specified with
EXPort:NAME. The active slot is queried with LOGGer:SLOT:ACTive?.
Beispiel:
Verwendung:

15.11 Protokollanalyse

● Allgemeine
● I2C (Option R&S
● SPI (Option R&S
● UART/RS-232/RS-422/RS-485 (Option R&S
● CAN (Option R&S RTH-K3/R&S
● LIN (Option R&S
● SENT (Option R&S
Benutzerhandbuch 1326.1578.03 ─ 19
SLOT1 | SLOT2 | SLOT3 | SLOT4 | SLOT5 | SLOT6 | SLOT7 |
SLOT8 | SLOT9 | SLOT10
*RST: SLOT1
Nur Abfrage
String with path and filename with extension .csv or .mat.
RUN
LOGGer:SLOT:CURRent SLOT2
STOP
LOGGer:SLOT:ACTive?
<-- SLOT2
LOGGer:SLOT:EXPort:NAME '/media/USB1/SLOT2.MAT"
LOGGer:SLOT:EXPort:SAVE
Ereignis
Protokolleinstellungen........................................................................ 449
RTH-K1).................................................................................... 449
RTH-K1).................................................................................... 459
RTH-K9)............................................................473
RTH-K3).................................................................................... 488
RTH-K10).............................................................................. 497
Fernsteuerbefehle
Protokollanalyse
LOGGer:SLOT:
RTH-K2)........................................ 467
448