Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 410

®
R&S Scope Rider RTH
METer:SENSe:CAPacitance:NULL:VALue <ReferenceValue>
Sets the reference value for capacitance measurements. The measurement result is
the difference of the measured sample and the reference value.
The value takes effect if relative measurement is on, see
CAPacitance:NULL:STATe.
Parameter:
<ReferenceValue>
METer:SENSe:CURRent:AC:NULL:VALue <ReferenceValue>
METer:SENSe:CURRent:DC:NULL:VALue <ReferenceValue>
METer:SENSe:VOLTage:AC:NULL:VALue <ReferenceValue>
METer:SENSe:VOLTage:DC:NULL:VALue <ReferenceValue>
Sets the reference value for relative measurements. The measurement result is the dif-
ference of the measured sample and the reference value.
The value takes effect if relative measurement is on, see
tion>:NULL:STATe.
Parameter:
<ReferenceValue>
METer:SENSe:RESistance:NULL:VALue <ReferenceValue>
Sets the reference value for resistance measurements. The measurement result is the
difference of the measured sample and the reference value.
The value takes effect if relative measurement is on, see
RESistance:NULL:STATe.
Parameter:
<ReferenceValue>
METer:SENSe:TEMPerature:NULL:VALue <ReferenceValue>
Sets the reference value for temperature measurements. The measurement result is
the difference of the measured sample and the reference value.
The value takes effect if relative measurement is on, see
TEMPerature:NULL:STATe.
Benutzerhandbuch 1326.1578.03 ─ 19
Bereich: +/- (1.1 * measurement range)
*RST: 0
Std.-einheit: F
Bereich: +/- (1.1 * measurement range)
*RST: 0
Std.-einheit: V (VOLTage) | A (CURRent)
Bereich: +/- (1.1 * measurement range)
*RST: 0
Std.-einheit: Ohm
Fernsteuerbefehle
Digitalmultimeter (R&S RTH1002)
METer:SENSe:
METer:SENSe:<func
METer:SENSe:
METer:SENSe:
410