Cursor-Messungen Im Spektrum-Modus - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
SPECtrum:WAVeform:AVERage[:ENABle] <State>
Displays the averaged spectrum trace. The number of traces to average is defined
using
Parameter:
<State>
SPECtrum:WAVeform:MAXimum[:ENABle] <State>
Displays the „Max Hold" spectrum trace.
Parameter:
<State>
SPECtrum:WAVeform:MINimum[:ENABle] <State>
Displays the „Min Hold" spectrum trace.
Parameter:
<State>
SPECtrum:WAVeform:SPECtrum[:ENABle] <State>
Displays the clear/write spectrum trace.
Parameter:
<State>
SPECtrum:FREQuency:RESet
Clears the results for previous measurements used in statistical evaluation (see
SPECtrum:WAVeform:AVERage[:ENABle],
ENABle],
FREQuency:AVERage:COUNt
Verwendung:
15.6.2.2

Cursor-Messungen im Spektrum-Modus

Für den Spektrum-Modus sind spezielle Cursor-Befehle verfügbar.
SPECtrum:CURSor<m>:STATe
SPECtrum:CURSor<m>:SOURce
SPECtrum:CURSor<m>:COUPling
Benutzerhandbuch 1326.1578.03 ─ 19
SPECtrum:FREQuency:AVERage:COUNt
ON | OFF
*RST:
ON | OFF
*RST:
ON | OFF
*RST:
ON | OFF
*RST:
SPECtrum:WAVeform:MINimum[:ENABle]
Ereignis
....................................................................................... 382
auf Seite 379.
OFF
OFF
OFF
ON
SPECtrum:WAVeform:MAXimum[:
auf Seite 379).
....................................................................................382
.................................................................................. 382
Fernsteuerbefehle
Spektrumanalyse
and
SPECtrum:
381