Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 500

®
R&S Scope Rider RTH
BUS:SENT:PPFLength <FrameLength>
Defines a constant transmission sequence length. To select the fixed sequence length,
set
BUS:SENT:PPULse
Parameter:
<FrameLength>
BUS:SENT:PPULse <PausePulse>
Determines if a pause pulse is part of the SENT transmission sequence.
Parameter:
<PausePulse>
BUS:SENT:SFORmat <Format>
Selects the serial message format.
Parameter:
<Format>
BUS:SENT:RDSL <Display>
Selects the display table view mode for the SENT protocol.
Parameter:
<Display>
Benutzerhandbuch 1326.1578.03 ─ 19
to PPFL.
Bereich: 104 bis 922
Inkrement: 1
*RST: 128
NPP | PP | PPFL
PP
Transmits the message with a fixed pulse length, automatically
calculated.
NPP
Transmits the SENT message without pause pulse.
PPFL
Transmits the pause pulse with a user-defined frame length to
obtain a transmission sequence with constant length.
*RST: NPP
NONE | SHORt | ENHanced
SHORt = Short serial message.
ENHanced = Enhanced serial message.
NONE = Single transmission sequence.
*RST: NONE
TRSQ | SMSG
TRSQ: fast channel
SMSG: slow channel
*RST: TRSQ
Fernsteuerbefehle
Protokollanalyse
500