Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 372

®
R&S Scope Rider RTH
15.5.2 Maskentest
MASK:ONViolation[:SELection]
MASK:RST
MASK[:TESTstate]?
MASK:CHANnel<m>:RESult:FAIL:PERCentage?
MASK:CHANnel<m>:RESult:FAIL[:COUNt]?
MASK:CHANnel<m>:RESult:PASS:PERCentage?
MASK:CHANnel<m>:RESult:PASS[:COUNt]?
MASK:CHANnel<m>:RESult:TOTL[:COUNt]?
MASK:ELAPsedtime:TOTal?
MASK:ELAPsedtime[:SECS]?
MASK:ONViolation[:SELection] <SelectedActions>
Defines the action to be executed if a violation occurs.
Parameter:
<SelectedActions>
MASK:RST
Sets the counters of passed and failed acquisitions to zero.
Verwendung:
MASK[:TESTstate]?
Returns the state of the mask test.
Rückgabewerte:
<TestState>
Verwendung:
MASK:CHANnel<m>:RESult:FAIL:PERCentage?
Returns the percentage share of failed acquisitions.
Suffix:
<m>
Benutzerhandbuch 1326.1578.03 ─ 19
....................................................................................... 372
....................................................................................................................372
........................................................................................................372
........................................................................................... 374
......................................................................................... 374
NONE | STOP | BEEP | BPSTop
*RST:
Ereignis
NOMask | IDLE | RUNNing
NOMask
No mask is active and no testing is possible.
IDLE
Mask test has been stopped or not yet started.
RUNNing
The test is running.
*RST:
Nur Abfrage
.
1|2|5 (RTH1002) , 1..5 (RTH1004)
.............................................................. 372
.....................................................................373
............................................................ 373
................................................................... 373
................................................................... 374
NONE
NOMask
Fernsteuerbefehle
Maskentests
372