Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 473

®
R&S Scope Rider RTH
BUS:UART:WORD<m>:VALue?
Return the value of the specified symbol (word).
Suffix:
<m>
Rückgabewerte:
<Value>
Verwendung:
15.11.5 CAN (Option R&S RTH-K3/R&S RTH-K9)
● CAN-Konfigurationseinstellungen......................................................................... 473
● CAN-Trigger.......................................................................................................... 477
● CAN-Decodierungsergebnisse..............................................................................481
15.11.5.1 CAN-Konfigurationseinstellungen
BUS:CAN:DATA:SOURce
BUS:CAN:TYPE
BUS:CAN:BITRate
BUS:CAN:TECHnology
BUS:CAN:DATA:THReshold
BUS:SETReflevels
BUS:CAN:SAMPlepoint
BUS:CAN:FDATa:ABITrate
BUS:CAN:FDATa:ASAMplepoint
BUS:CAN:FDATa:DBITrate
BUS:CAN:FDATa:DSAMplepoint
BUS:CAN:FDATa:ENABle
BUS:CAN:FDATa:PSTandard
BUS:CAN:DATA:SOURce <Channel>
Sets the input channel of the CAN line.
Parameter:
<Channel>
Verwendung:
Benutzerhandbuch 1326.1578.03 ─ 19
.
*
Selects the word.
Decimal value
Bereich: 0 bis 255
Inkrement: 1
*RST: 0
Nur Abfrage
............................................................................................... 473
............................................................................................................ 474
......................................................................................................... 474
...................................................................................................474
............................................................................................475
......................................................................................................... 475
.................................................................................................. 475
..............................................................................................475
......................................................................................475
..............................................................................................476
......................................................................................476
............................................................................................... 476
.......................................................................................... 476
C1 | C2 | C3 | C4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7
C3 and C4: only R&S RTH1004
Digital channels are available if option R&S RTH-B1 is installed.
*RST: C1
Asynchroner Befehl
Fernsteuerbefehle
Protokollanalyse
473