Logikanalysator (R&S Rth-B1 Mso) - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
BUS:SENT:FRAMe<m>:TYPE?
Returns the type of SENT message.
Suffix:
<m>
Rückgabewerte:
<FrameType>
Verwendung:
15.12 Logikanalysator (R&S RTH-B1 MSO)
LOGic:STATe
LOGic:THCoupling
LOGic:GROup<m>:TECHnology
LOGic:GROup<m>:USER
LOGic:GROup<m>:THReshold?
LOGic:GROup<m>:HYSTeresis
LOGic:CHANnel<m>:DESKew
POD:STATe?
LOGic:STATe <State>
Enables or disables the logic channels.
Parameter:
<State>
LOGic:THCoupling <ThresCoup>
Couples the threshold and hysteresis settings for the logic channels.
If enabled, all logic channels use the same threshold and hysteresis settings.
If disabled, 2 channel groups are available, which can use different threshold and hys-
teresis settings: D0 - D3, and D4 - D7.
Parameter:
<ThresCoup>
Benutzerhandbuch 1326.1578.03 ─ 19
.
*
TRSQ | SMSG | EMSG
TRSQ = transmission sequence
SMSG = short serial message
EMSG = enhanced serial message
*RST:
Nur Abfrage
................................................................................................................. 509
......................................................................................................... 509
..................................................................................... 510
...............................................................................................510
...................................................................................... 511
....................................................................................... 511
.........................................................................................511
................................................................................................................. 512
ON | OFF
*RST:
ON | OFF
*RST:
Logikanalysator (R&S RTH-B1 MSO)
TRSQ
OFF
ON
Fernsteuerbefehle
509