Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 338

®
R&S Scope Rider RTH
15.3.5.5 Video/TV-Trigger
Die Normen PAL, PAL-M, NTSC und SECAM sind in der Geräte-Firmware verfügbar.
Alle anderen Normen und kundenspezifischen Signale erfordern die erweiterte Trigger-
option R&S RTH-K19.
TRIGger:TV:STANdard
TRIGger:TV:POLarity
TRIGger:TV:MODE
TRIGger:TV:LINE
TRIGger:TV:LFIeld
TRIGger:TV:CUSTom:STYPe
TRIGger:TV:CUSTom:LDURation
TRIGger:TV:CUSTom:SDURation
TRIGger:TV:CUSTom:SCANmode
TRIGger:TV:STANdard <Standard>
Selects the TV standard or CUSTom for user-defined signals.
Parameter:
<Standard>
TRIGger:TV:POLarity <Polarity>
Sets the polarity of the signal. Note that the sync pulse has the opposite polarity, for
example, a positive signal has a negative sync pulse.
Benutzerhandbuch 1326.1578.03 ─ 19
................................................................................................... 338
..................................................................................................... 338
........................................................................................................ 339
...........................................................................................................339
......................................................................................................... 339
..........................................................................................340
.................................................................................... 340
.................................................................................... 340
................................................................................... 340
PAL | PALM | NTSC | SECam | P480L60HZ | P576L50HZ |
P720L30HZ | P720L50HZ | P720L60HZ | I1080L50HZ |
I1080L60HZ | P1080L24HZ | P1080L24HZSF | P1080L25HZ |
P1080L30HZ | P1080L50HZ | P1080L60HZ | CUSTom
PAL | PALM | NTSC | SECam
Standards delivered with the instrument firmware.
PxxxxLyyHZ
HDTV standards using progressive scanning (P). xxxx indicates
the number of active lines, yy is the frame rate.
Triggering on HDTV standards requires the option R&S RTH-
K19.
IxxxxLxxHZ
HDTV standards using interlaced scanning (I). xxxx indicates the
number of active lines, yy is the field rate.
P1080L24HZSF
1080p/24sF is an HDTV standard using progressive segmented
frame scanning.
CUSTom
Used for signals of other video systems, for example, medical
displays, video monitors, and security cameras. Requires option
R&S RTH-K19.
*RST: PAL
Fernsteuerbefehle
Einrichten von Messkurven
338