Harmonic:display:type; Harmonic:display:user - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
Verwendung:
HARMonic:DISPlay:TYPE <Selection>
Determines the number of harmonics to be displayed in the bargraph.
Note that this setting only affects the graphical result display. It has no effect on the
selection of harmonics for which results are provided during a file export (manually or
via remote command). For that purpose, use
Harmonics that were previously eliminated by the
mand cannot be displayed.
Parameter:
<Selection>
HARMonic:DISPlay:USER <MaxHarmonics>
Determines the maximum number of harmonics to be displayed in the bargraph. This
command requires a preceding
Note that this setting only affects the graphical result display. It has no effect on the
selection of harmonics for which results are provided during a file export (manually or
via remote command). For that purpose, use
Harmonics that are eliminated by the
displayed.
Parameter:
<MaxHarmonics>
Beispiel:
Benutzerhandbuch 1326.1578.03 ─ 19
Ereignis
ALL | EVEN | ODD | ODD3 | ODN3 | USER
ODD3
All harmonics with an odd-numbered order that is a multiple of 3
ODN3
All harmonics with an odd-numbered order that cannot be divi-
ded by 3
USER
Selects a user-defined number of harmonics. Define the number
of harmonics using the
*RST: ALL
HARM:DISP:TYPE USER
HARMonic:LIMits:TYPE
Bereich: 1 bis 64
Inkrement: 1
*RST: 10
HARM:DISP:TYPE USER
HARM:DISP:USER 25
Displays the first 25 harmonics.
Fernsteuerbefehle
HARMonic:LIMits:TYPE
HARMonic:LIMits:TYPE

HARMonic:DISPlay:USER

command.
HARMonic:LIMits:TYPE
command cannot be
Spektrumanalyse
auf Seite 392.
com-
command.
auf Seite 392.
390