Bus:can:bitrate; Bus:can:technology - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
BUS:CAN:TYPE <SignalType>
Selects whether the chip select signal is high active (high = 1) or low active (low = 1).
Parameter:
<SignalType>
BUS:CAN:BITRate <CustomBitrate>
Sets the number of transmitted bits per second.
Parameter:
<CustomBitrate>
BUS:CAN:TECHnology <ThresholdType>
Parameter:
<ThresholdType>
Benutzerhandbuch 1326.1578.03 ─ 19
CANH | CANL
CANH
Signal is high active (high = 1).
CANL
Signal is low active (low = 1).
*RST: CANL
Bereich: 10000 bis 1000000
Inkrement: 1
*RST: 50000
Std.-einheit: bps
TTL | ECL | CMOS | CAN | GND | LIN7vsupply | LIN12vsupply |
LIN18vsupply | USER
TTL
1.4 V
ECL
-1.3 V
CMOS
2.5 V
GND
0 V: for CAN channels, requires the option R&S RTH-K3.
CAN
2 V: for CAN channels, requires the option R&S RTH-K3.
LIN7vsupply | LIN12vsupply | LIN18vsupply
7 V / 12 V / 18 V: for LIN channels, requires the option
R&S RTH-K3.
USER
Set the value with CHANnel<m>:THReshold:USER.
*RST: CAN
Fernsteuerbefehle
Protokollanalyse
474