Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 422

®
R&S Scope Rider RTH
Beispiel:
15.8.3 Relative Messungen
Setzen Sie zur Durchführung relativer Messungen den relevanten
METer<m>:SENSe:<function>:NULL:STATe-Befehl auf ON. Der Referenzwert ist
standardmäßig 0. Alternativ können Sie METer<m>:SENSe:RELative:STATe ver-
wenden.
Sie können den Referenzwert mit dem Befehl
METer<m>:SENSe:<function>:NULL:VALue ändern.
METer<m>:SENSe:CURRent:AC:NULL:STATe
METer<m>:SENSe:CURRent:DC:NULL:STATe
METer<m>:SENSe:VOLTage:AC:NULL:STATe
METer<m>:SENSe:VOLTage:DC:NULL:STATe
METer<m>:SENSe:NULL:STATe
METer<m>:SENSe:RELative:STATe
METer<m>:SENSe:CURRent:AC:NULL:VALue
METer<m>:SENSe:CURRent:DC:NULL:VALue
METer<m>:SENSe:VOLTage:AC:NULL:VALue
METer<m>:SENSe:VOLTage:DC:NULL:VALue
METer<m>:SENSe:NULL:VALU
METer<m>:SENSe:CURRent:AC:NULL:STATe <State>
METer<m>:SENSe:CURRent:DC:NULL:STATe <State>
METer<m>:SENSe:VOLTage:AC:NULL:STATe <State>
METer<m>:SENSe:VOLTage:DC:NULL:STATe <State>
Enables or disables the relative measurement. The reference value is defined using
METer:SENSe:<function>:NULL:VALue
Benutzerhandbuch 1326.1578.03 ─ 19
Configure and perform AC+DC current measurement with the
range 100 A:
:METer:CONFigure:CURRent:AC 100
:METer:SENSe:FUNCtion 'CURR:AC'
:METer:CONFigure:VALue?
<-- "CURR:AC 100"
:METer:SENSe:CURRent:AC:COUPling DCL
:METer:READ?
<-- 0.035906488794
Configure and perform AC voltage measurement with the range
10 V:
:METer:CONFigure:VAOLTage:AC 10
:METer:SENSe:FUNCtion 'VOLT:AC'
:METer:CONFigure:VALue?
<-- "VOLT:AC 10"
:METer:SENSe:CURRent:AC:COUPling ACL
:METer:READ?
<-- 0.030006488794
................................................................. 422
................................................................. 422
.................................................................. 422
..................................................................422
......................................................................................423
.................................................................................423
................................................................. 423
................................................................. 423
..................................................................423
..................................................................423
.......................................................................................423
Fernsteuerbefehle
Voltmeter (R&S RTH1004)
422