Rohde & Schwarz Scope Rider RTH Benutzerhandbuch Seite 394

®
R&S Scope Rider RTH
HARMonic:RESult<m>:HARMonics<n>:RELMagnitude:MAXimum?
HARMonic:RESult<m>:HARMonics<n>:RELMagnitude:MINimum?
HARMonic:RESult<m>:HARMonics<n>:RELMagnitude[:CURRent]?
HARMonic:RESult<m>:HARMonics<n>[:FREQuency]?
HARMonic:RESult<m>:LIMViolation?
HARMonic:RESult<m>:NOHarmonics?
HARMonic:RESult<m>:NOResults?
HARMonic:RESult<m>:RMS:MAXimum?
HARMonic:RESult<m>:RMS:MINimum?
HARMonic:RESult<m>:RMS[:CURRent]?
HARMonic:RESult<m>:THD:MAXimum?
HARMonic:RESult<m>:THD:MINimum?
HARMonic:RESult<m>:THD[:CURRent]?
HARMonic:EXPort:NAME <Name>
Defines the filename, file format and path to save the harmonic measurement results.
Parameter:
<Name>
HARMonic:EXPort:SAVE
Saves the results of the harmonic measurement to the file specified using
EXPort:NAME.
Beispiel:
Verwendung:
HARMonic:RESult<m>:CLIPping?
Indicates whether clipping has occurred, that is: the amplitudes exceed the currently
defined amplitude range.
Suffix:
<m>
Rückgabewerte:
<State>
Benutzerhandbuch 1326.1578.03 ─ 19
...............................................................................399
............................................................................ 399
................................................................................. 399
..........................................................................400
...........................................................................400
.........................................................................400
.......................................................................... 400
........................................................................... 400
......................................................................... 400
String with path and filename with extension .csv.
HARMonic:EXPort:NAME 'HarmonicResults'
HARMonic:EXPort:SAVE
HARMonic:EXPort:NAME?
//Result: /media/SD/Rohde-Schwarz/RTH/Export/HarmonicResults.csv
Ereignis
.
1|2 (RTH1002) , 1..4 (RTH1004)
Input channel
ON | OFF
ON
Clipping has occurred, increase the amplitude range (see
auf Seite 322).
CHANnel<m>:RANGe
OFF
No clipping has occurred, the current measurement settings are
suitable.
Fernsteuerbefehle
Spektrumanalyse
....................................398
.....................................398
................................... 398
......................................................398
HARMonic:
394