Spectrum:source; Spectrum:frequency:center - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
SPECtrum:SOURce
SPECtrum:FREQuency:BANDwidth[:RESolution][:VALue]
SPECtrum:FREQuency:CENTer
SPECtrum:FREQuency:HORizontal:SCALe
SPECtrum:FREQuency:MAGNitude:SCALe
SPECtrum:FREQuency:SAMPle?
SPECtrum:FREQuency:SPAN:MODE
SPECtrum:FREQuency:SPAN[:VALue]
SPECtrum:FREQuency:STARt
SPECtrum:FREQuency:STOP
SPECtrum:FREQuency:WINDow:FACTor?
SPECtrum:FREQuency:WINDow:TYPE
SPECtrum:SOURce <Source>
Selects the channel for which the captured data is analyzed in FFT mode.
Parameter:
<Source>
SPECtrum:FREQuency:BANDwidth[:RESolution][:VALue]
Queries or defines the used resolution bandwidth. The value depends on the
SPECtrum:FREQuency:SPAN:MODE
In FFT mode, this command is query only.
Parameter:
<RBW>
SPECtrum:FREQuency:CENTer <HorizCenter>
Queries or defines the used center frequency. The value depends on the
FREQuency:SPAN:MODE
In FFT mode, this command is query-only.
Parameter:
<HorizCenter>
SPECtrum:FREQuency:HORizontal:SCALe <Scaling>
Defines the scaling method for the frequency axis (x-axis) of the spectrum display.
Benutzerhandbuch 1326.1578.03 ─ 19
....................................................................................................... 375
...................................................................................... 375
......................................................................375
......................................................................376
.................................................................................... 376
.............................................................................. 376
.............................................................................376
........................................................................................ 377
.........................................................................................377
....................................................................... 377
........................................................................... 377
C1 | C2 | C3 | C4
*RST: C1
and
Bereich: 1 bis 50E+9
Inkrement: 1E+6
*RST: 500E+3
Std.-einheit: Hz
and
CHANnel<m>:BANDwidth
Bereich: 500 bis 500E+6
Inkrement: 10
*RST: 250E+6
Std.-einheit: Hz
..................................................375
CHANnel<m>:BANDwidth
parameters.
Fernsteuerbefehle
Spektrumanalyse
parameters.
SPECtrum:
375