Skalierung - Rohde & Schwarz Scope Rider Rth Benutzerhandbuch

®
R&S Scope Rider RTH
Firmware/Software: FW 1.60 and higher
LOGGer:SLOT:SLOT<m>:STARt? <Year>, <Month>, <Day>, <Hour>, <Min>, <Sec>
Returns the start time of the logger record. If the slot is empty, the command returns an
error.
Suffix:
<m>
Abfrageparameter:
<Year>, <Month>,
<Day>, <Hour>,
<Min>, <Sec>,
<ZSec>
Verwendung:
Firmware/Software: FW 1.60 and higher
LOGGer:SLOT:LOAD
Loads the logger record of a slot, and activates the slot. The slot is defined using
LOGGer:SLOT:CURRent.
Verwendung:
LOGGer:SLOT:CLEar
Deletes the log data of a slot. The slot is defined using LOGGer:SLOT:CURRent.
Only possible while logging is stopped.
Verwendung:
LOGGer:ACLR
Deletes the log data of all slots. Only possible while logging is stopped.
Verwendung:

15.10.2 Skalierung

LOGGer:AUToset
LOGGer:MEASurement<m>:VERTical:AUTO
LOGGer:MEASurement<m>:VERTical:UPPer
LOGGer:MEASurement<m>:VERTical:LOWer
LOGGer:MEASurement<m>:VERTical:DEViation
LOGGer:MEASurement<m>:VERTical:MEAN
Benutzerhandbuch 1326.1578.03 ─ 19
.
1..10
Slot number
Date and time of the slot start
Nur Abfrage
Ereignis
Ereignis
Ereignis
...........................................................................................................439
....................................................................439
................................................................... 439
.................................................................. 439
.............................................................. 440
................................................................... 440
Fernsteuerbefehle
Daten-Logger
438