Grundfos Control DDD Montage- Und Betriebsanleitung Seite 58

8.7.61 Functions, CU 354 (4.5)
Fig. 115 Functions, CU 354
Description
Make the basic settings of CU 354 in this submenu.
CU 354 comes with most of these settings, or they are made at
startup and normally not to be changed.
The service language, British English, can be selected for service
purposes. If no buttons are touched for 15 minutes, the display
returns to the language selected at startup or to the language set
in Display language (4.5.1).
If the service language is selected, the settings
symbol will be shown to the right of the top line of all
displays.
Setting range
• Activation of service language, British English.
• Re-activation of startup wizard.
(After startup, the wizard is inactive.)
• Selection of display language.
• Selection of display units.
• Setting date and time.
• Selection of password for the menu "Operation" and
"Settings".
• Setting of Ethernet communication.
• Setting of GENIbus number.
• Reading of software status.
58
8.7.62 Display language (4.5.1)
Fig. 116 Display language
Description
Here you select the language for the CU 354 display.
Setting range
• English.
Setting via operating panel
• Settings > Functions, CU 354.
Factory setting
The display language is British English.
8.7.63 Units (4.5.2)
Fig. 117 Units
Description
Here you can select units for the various parameters.
Select between SI and imperial units. You can also select other
units for the individual parameters.