Case Medical SteriTite Bedienungsanleitung Seite 12

MediTray® Labeling
The MediTray® System combines unbeatable protection of sensitive instrumentation with maximum
convenience. Use the inserts for the MediTray® system and the SteriTite® sealed Container system.
MediTray® cases and covers must be wrapped or placed in a sealed Container for sterilization.
INTENDED USE: MediTray® is intended to be used for the sterilization of reusable surgical instruments and
medical devices in health care facilities. MediTray® products may be containerized or wrapped with an FDA
cleared medical wrap. Please refer to the recommendations of your sterilizer manufacturer for specific
reprocessing instructions as well as recommendations from your medical device manufacturer for material
compatibility and requirements for extended sterilization cycles.
Note: MediTray® products may be used in steam, and low temperature sterilization, including EO, V-Pro,
STERIZONE and H2O2 gas plasma (STERRAD) Sterilization.
REPROCESSING INSTRUCTIONS
Thoroughly clean and decontaminate MediTray® products prior to use. Use only pH neutral enzymatic
cleaners and detergents. Abrasive cleaners, abrasive pads, or metal brushes cannot be used. MediTray®
baskets and trays are recommended for automatic cleaning cycles. Be sure to follow all cleaning steps with
a thorough rinse. Case Medical recommends its pH neutral Case Solutions and SuperNova cleaners for
decontamination of medical devices including MediTray® and SteriTite® products. Dry product thoroughly
before sterilization or further processing. A lint free cloth may be used for the drying process.
Warning: Use of a caustic cleaner can damage the anodized surface of aluminum devices and may cause
corrosion. This practice will void the company's warranty.
ASSEMBLY: All MediTray® baskets, trays, and case-trays are designed with a unique patented grid pattern
allowing for ease of assembly. BackBone® silicone brackets can be used to elevate and secure surgical
instruments.
For delicate instruments which require a firm yet cushioning grip, use BackBone® silicone brackets with
patented inner spine. BackBone® brackets have snap-in feet which attach securely to the base of your
MediTray® basket, tray, or case-tray, without the need for tools. To remove a BackBone Bracket, push over
with your fingers or palm to remove. If necessary, compress the snap-in feet on the underside with the
MediTray® post tool or needle-nose pliers. MediTray® metal brackets, partitions, and posts are secured
with threaded nuts.
Copyright 2020 Case Medical, Inc.®
12
IFU-CASETRANS Rev. 004A
E
n
g
l
i
s
h