Herunterladen Inhalt Inhalt Diese Seite drucken

Status Codes; Functional Description - Balluff BIS U-6127-081-1 4-06-ST36 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

BIS U-6127-081-1_4-06-ST36
Processor unit
8
007 protocol (continued)
8.6

Status codes

Status
Hex

Functional description

code
'0'
30
OK/Successful
hex
'1'
31
No data carrier in the detection range
hex
of the antenna.
'2'
32
Reading of data carrier not possible.
hex
'3'
33
Data carrier was removed from the
hex
detection range of the antenna during
reading.
'4'
34
Cannot write to the data carrier.
hex
'5'
35
Data carrier was removed from the
hex
detection range of the antenna during
writing.
'6'
36
The device has detected a hardware
hex
problem.
'7'
37
Sent data does not comply with 007
hex
protocol.
'8'
38
BCC of the received data does not
hex
match the transmitted BCC.
'9'
39
Cable break on an active antenna
hex
port or no antenna connected.
'A'
41
There is more than 1 data carrier in
hex
the detection range of the antenna(s)
(only for single tag operations).
'D'
44
Internal device error
hex
'E'
45
CRC or signature of the data carrier
hex
incorrect.
'F'
46
The selected memory area is not sup-
hex
ported by the data carrier.
'N'
4E
The selected antenna is not active.
hex
'P'
50
The command was executed on the
hex
wrong Ethernet port.
'S'
53
The command or parameter is not
hex
supported by the processor unit.
'X'
58
Access denied. The current user level
hex
does not allow this action.
'Y'
59
The device is currently in a state that
hex
does not allow the command to be
executed.
'a'
61
This function is not supported by the
hex
data carrier
'b'
62
Incorrect or invalid license key
hex
94
english
Status
Hex
Functional description
code
'c'
63
Invalid parameter values were written.
hex
'd'
64
Communication between the proces-
hex
sor unit and the data carrier is inter-
rupted.
'f'
66
A password is required for this opera-
hex
tion.
'g'
67
Invalid password
hex
'h'
68
The selected memory area is locked.
hex
'i'
69
A specified parameter is outside the
hex
valid range of values.
'j'
6A
Command is not supported by the
hex
data carrier/no or incorrect data
carrier selected.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bis0193

Inhaltsverzeichnis