Parameter Overview - Balluff BIS U-6127-081-1 4-06-ST36 Betriebsanleitung

BIS U-6127-081-1_4-06-ST36
Processor unit
7
Startup and operation (continued)
7.3.2

Parameter overview

The following overview lists the parameters that can be
used and provides information about the required security
level S
/e /a
tandaRd xpeRt dmin
validity period.
Global/Local/Antenna
The scope indicates whether a parameter is valid globally
or only for a session or an antenna port.
g : Parameters are applied to all antennas or
loBal
sessions. Some parameters are only
applied to 007 sessions when the device
is restarted.
S : Parameters apply only to the current
eSSion
session (TCP connection) and can be set
independently for each session.
a : Parameters refer to one antenna port and
ntenna
can be set independently for each
antenna port. These values apply to all
sessions.
Persistent/temporary
The validity period defines whether a parameter is stored
permanently or only for the current TCP connection
(session) or until a restart of the processor unit.
p : Parameters are stored permanently and
eRSiStent
retain their value even after a restart of the
processor unit.
t : Parameters lose their validity when the
empoRaRy
current session is ended or the processor
unit is restarted.
Reset (Yes/No)
When changing some parameters, a restart of the
processor unit is required. The restart must be initiated
manually.
Some parameters are marked with the addition
default. These parameters are persistent and
retain their value even after a restart of the
processor unit. Depending on the parameter, a
higher authorization level may be necessary.
50 english
as well as the scope and
Parameters for standard users
Para- Parameters Global/
meter- Session/
ID Antenna
0003 Max. EPC Global
hex
length (read
only)
1001 Transmitting Session
hex
power on
read (current)
1002 Access Session
hex
password
1004 Memory bank Session
hex
1006 AsyncOpera- Session
hex
tion
1007 AdminLevel- Session
hex
Login
Parameters for experts
To set expert parameters, access to the expert security
level is required (see Data security on page 11 and User
Management on page 45).
Air interface, radio parameters
Para- Parameters Global/
meter- Session/
ID Antenna
0001 Radio profile Global
hex
0002 Initial Q-value/ Global
hex
expected
number of
tags
0005 Session Global
hex
0006 Preamble Global
hex
(pilot tone)
0007 Modulation Global
hex
(ASK/PR-
ASK)
0008 Transmitting Global
hex
power on
read (default),
see also
session-rela-
ted parame-
ter 1001
hex
0009 Automatic Global
hex
increase of
transmitting
power on
write
000B Active chan- Global
hex
nels (ETSI
only)
1003 Auto-Setup Session
hex
Persi- Reset
stent/
temporary
Persistent No
Temporary No
Temporary No
Temporary No
Temporary No
Temporary No
Persi- Reset
stent/
temporary
Persistent No
Persistent No
Persistent No
Persistent No
Persistent No
Persistent No
Persistent No
Persistent No
Persistent No