Balluff BIS U-6127-081-1 4-06-ST36 Betriebsanleitung Seite 223

BIS U-6127-081-1_4-06-ST36
Processor unit
7
Startup and operation (continued)
Tag signature test
Fig. 7-29: Tag signature test
To execute g
eneRate SignatuRe
at least the e authorization level is required.
xpeRt
Tag scanning can be performed in a similar way as in
section Start scan, Read/write on page 35. Scanned
tags are listed in the left table, where a tag can be selected
to perform a tag test. First, the signature must be
generated and then the signature can be tested.
To create a signature, the user must check if the signature
type is enabled (parameter 002A
can be achieved via the Tag signature web page
(see Fig. 7-27). If it is not enabled, the message t
may be displayed on the screen.
SignatuRe function diSaBled
As a result of the signature generation, the data on the tag
will be written accordingly.
After successful generation of the signature, the user can
select the c S button (c) for testing. The Read
heck ignatuRe
tag format operation is then performed and the result of
the signature test is displayed.
www.balluff.com
or t ,
eSt SignatuRe
, see page 81), which
hex
ag
english 47