Balluff BIS U-6127-081-1 4-06-ST36 Betriebsanleitung Seite 327

BIS U-6127-081-1_4-06-ST36
Processor unit
9
OPC UA (continued)
GetFilter
This method returns the settings for the active filter. The
method is session-related.
Call parameter
Name Data Type
Index UInt16
Return parameter
Name Data Type
EpcDataFilter BalluffFilterDa-
taBlock
TidDataFilter BalluffFilterDa-
taBlock
MinRSSI Int16
MaxRSSI Int16
MinEpcLength UInt16
MaxEpcLength UInt16
Result AutoIdOperati-
onStatusEnu-
meration (see
chapter 9.7.2
on page 161)
www.balluff.com
SetMultipleTagDataHeader
This method can be used to edit and specify the strings
that can be prepended or appended to the tag list of
ReadMultipleTagDataFormatted() (see page 145)
(see Prefix for ReadMultipleTagDataFormatted (default) in
chapter 7.3 on page 80).
Description
Min. Access Level: Admin
Index of the filter
Default values: Prefix: Parameter 0026
whose values are to
ReadMultipleTagDataFormatted (default) in chapter 7.3 on
be output.
page 80)
Suffix: Parameter 0027
ReadMultipleTagDataFormatted (default) in chapter 7.3 on
Description
page 80)
Returns the start
Call parameter
address, length and
data of the filter
which is applied to
the EPCs.
Returns the start
address, length and
data of the filter
which is applied to
the TIDs.
Minimum RSSI value
with which a tag
must be detected.
Maximum RSSI
Return parameter
value with which a
tag may be
detected.
Minimum EPC
length of a tag in
bytes.
Maximum EPC
length of a tag in
bytes.
Returns the result of
the operation.
(see Suffix for
hex
Name Data Type
Prefix String
Suffix String
UseAsDefault Boolean
Name Data Type
Result AutoIdOperati-
onStatusEnu-
meration (see
chapter 9.7.2
on page 161)
(see Prefix for
hex
Description
String which will be
prepended to the
tag list.
String which will be
appended to the tag
list.
If this value is set to
, the set strings
tRue
are taken as default
values.
Description
Returns the result of
the operation.
english 151