Balluff BIS U-6127-081-1 4-06-ST36 Betriebsanleitung Seite 219

BIS U-6127-081-1_4-06-ST36
Processor unit
7
Startup and operation (continued)
General
Fig. 7-21: General
On the g page, the ports used by the UHF 007
eneRal
communication protocol can be changed. The changes
are only applied after a device restart.
007 should only be deactivated for the USB
port with caution!
The USB port may be the only way to retrieve
and change the IP address of the device once it
is lost.
The communication protocol allows connection to the
device via five TCP/IP ports and one USB port:
– Port 10001
– Port 10002
– Port 10003
– Port 10004
– Port 10005
– Tty USB port
Four configurations (a) are available:
– o opens all available ports.
n
– o closes all available ports.
ff
– uSp o closes all ports except the USB port.
nly
(read-only) defines the port condition that does
–
cuStom
not match any of the above three options.
www.balluff.com english 43