Balluff BIS U-6127-081-1 4-06-ST36 Betriebsanleitung Seite 329

BIS U-6127-081-1_4-06-ST36
Processor unit
9
OPC UA (continued)
SetTagDataFormat
This method can be used to specify the format string used
to format the data of individual tags in the
ReadMultipleTagDataFormatted() (see page 145) and
ReadFormattedTagData() (see page 144) methods.
With the WriteTagDataFormatted() method (see
page 144) the data to be written must correspond to the
set format.
A detailed description of the application and the different
possibilities can be found in chapter 8.11 on page 121.
Min. Access Level: Admin
Default values: Parameter 0025
ReadTagDataFormatted, ReadMultipleTagDataFormatted
and WriteFormattedTagData (default) in chapter 7.3 on
page 79)
Input parameter
Name Data Type
FormatString String
UseAsDefault Boolean
Result AutoIdOperati-
onStatusEnu-
meration (see
chapter 9.7.2
on page 161)
www.balluff.com
(see Format definition for
hex
Description
Format for the data
to be formatted.
If this value is set to
, the set format
tRue
is taken as the
default value.
Returns the result of
the operation.
GetTagDataFormat
This method returns the format string used to format the
data of individual tags in the
ReadMultipleTagDataFormatted() (see page 145) and
ReadFormattedTagData() (see page 144) methods.
Return parameter
Name Data Type
FormatString String
Result AutoIdOperati-
onStatusEnu-
meration (see
chapter 9.7.2
on page 161)
Description
Format in which the
tag data is format-
ted.
Returns the result of
the operation.
english 153