Scan Settings - Balluff BIS U-6127-081-1 4-06-ST36 Betriebsanleitung

BIS U-6127-081-1_4-06-ST36
Processor unit
9
OPC UA (continued)
9.6.2

Scan settings

AntennaActive
Data Type Boolean
Default value 007-Parameter 0012
Access rights Read: User
Write: Admin
007-Parameter 00012
hex
Parent Balluff extension: AutoIdDeviceType/
RuntimeParameters
Path Root/DeviceSet/BIS_U_6127_Rfid_
Provider/RuntimeParametersGlobal/
BalluffRfidRuntimeParametersAn-
tenna[1..4]
This variable can be used to activate or deactivate the
corresponding antenna globally, i.e. for all applications.
This setting corresponds to parameter 0012
chapter 7.3 on page 49). Admin authorization is
required.
AutoIncrementSendPower
Data Type Byte
Default value –
Access rights Read: User
Write: User
007-Parameter 0009
hex
Parent Balluff extension: AutoIdDeviceType/
RuntimeParameters
Path Root/DeviceSet/BIS_U_6127_Rfid_
Provider/RuntimeParametersGlobal/
BalluffRfidRuntimeParametersAn-
tenna[1..4]
This variable specifies the automatic increase of the write
power for all applications of the selected antenna.
www.balluff.com
BufferLenReadFormatted
Data Type
Default value
Access rights
007-Parameter
hex
Parent
Path
This variable determines how large (in bytes) the output
buffer per data carrier is for the methods
ReadFormattedTagData() (see page 144) and
ReadMultipleTagDataFormatted() (see page 145).
(see CodeTypes
hex
Data Type
Default value
Access rights
007-Parameter
Parent
Path
This variable specifies which formats are supported for the
EPC and is used to select the desired format. The
following formats are supported:
RAW:BYTES
RAW:STRING
EPC
UID
UInt32
500
Read: User
Write: User
–
Balluff extension: AutoIdDeviceType/
RuntimeParameters
Root/DeviceSet/BIS_U_6127_Rfid_
Provider/RuntimeParametersGlobal/
BalluffRfidRuntimeParametersCom-
mon
UInt32[]
0
Read: User
Write: Admin
–
AutoIdDeviceType/RuntimeParameters
Root/DeviceSet/BIS_U_6127_Rfid_
Provider/RuntimeParametersGlobal/
BalluffRfidRuntimeParametersCom-
mon
EPC binary
EPC ASCII
EPC structure (see chapter 9.7.15 on
page 164)
AutoID identifier according to
ISO/IEC 18000-3 Mode 3,
ISO/IEC 18000-63 and GS1 EPCglo-
bal
TM
english 159