BIS U-6127-081-1_4-06-ST36
Processor unit
7
Startup and operation (continued)
Formatted tag data
Fig. 7-17: Formatted tag data
To change settings of the following parameters,
the a
authorization level is required.
dmin
Settings for formatted tag data:
–
(a) Format definition for ReadTagDataFormatted,
ReadMultipleTagDataFormatted and
WriteFormattedTagData (default) (Parameter 0025
see page 79
–
(b) Prefix for ReadMultipleTagDataFormatted (default)
(Parameter 0026
) see page 80
hex
–
(c) Suffix for ReadMultipleTagDataFormatted (default)
(Parameter 0027
) see page 80
hex
With t
(d), the defined tag parameters can be checked
eSt
and displayed in the text field (e) (left: binary, right: ASCII
format).
Security settings
The security settings (see Fig. 7-18) are called up in the
menu under S
c
onfiguRation
page 36).
Fig. 7-18: Security settings
There are three tabs, under each of which different security
settings can be made:
–
OPC/UA
–
Secure Element
–
General
For more information on Data security, see chapter 3.6 on
page 11.
40
english
)
hex
(see Fig. 7-9 on
ecuRity