Operation - Balluff BIS U-6127-081-1 4-06-ST36 Betriebsanleitung

BIS U-6127-081-1_4-06-ST36
Processor unit
7
Startup and operation (continued)
7.5

Operation

When operating the processor unit, the following hazards
must be observed and avoided:
CAUTION
Ultra high frequency electromagnetic waves
The antennas of the identification system BIS U transmit
ultra-high frequency electromagnetic waves. Additional
measures must be taken to prevent health hazards.
► Make sure that people do not stay in the vicinity of
the antennas for an extended period of time.
► Use suitable measures to shield areas that are
explicitly not to be covered.
NOTICE
Exceeding the maximum current consumption
If the maximum current consumption is exceeded, the
processor unit and connected system components may
be damaged.
► During operation, make sure that the total current
carried by the Power terminal does not exceed 3 A.
► The voltage output (L+) on the IO-Link port and
digital outputs (I/O) are supplied via the Power
connection. The sum of the partial currents of these
pins, must not exceed a maximum current of 2 A.
88 english