Data Security; Bus Connection - Balluff BIS U-6026-034-104-06-ST35 Betriebsanleitung

BIS U-6026-034-1_4-06-ST35
Processor unit
3
Basic knowledge (continued)
3.4

Data security

In order to ensure data integrity, the data transfer between
the data carrier and processor unit can be monitored using
a CRC-16 data check.
3.5

Bus connection

Processor unit and controlling system communicate via
EtherNet/IP protocol.
EtherNet/IP is an industrial network standard. IP in
EtherNet/IP stands for Industrial Protocol. On the
application level (per ISO/OSI reference model) EtherNet/IP
uses the open communication protocol Common Industrial
Protocol (CIP).
EtherNet/IP is supported by the network organization
Open DeviceNet Vendor Association (ODVA).
Collision-free data exchange makes use of a switch in
full-duplex mode necessary.
10 english