Storing - Silit Sicomatic classic Bedienungshinweise

The lid may only be cleaned by hand
The valves and seals would be damaged in the dishwasher
due to the high temperature and chemicals used.
→ For this reason, always wash the lid by hand
→ Remove the lid gasket.
→ Clean the lid gasket in warm running water or in wash
water.
→ Always wash the lid by hand.
→ Rinse the valve and steam release openings under hot
running water.
→ to prevent damaging the seals.
Cleaning the operating valve in the case of heavy
soiling
If food leaks out via the operating valve, food residue
sticks to it. This can lead to soiling and clogging. In this
case, clean the operating valve thoroughly.
To do so, you must remove the operating valve.
Remove the operating valve
→ Press the sides of the operating valve and push the
operating valve out.
→ Rinse the removed valve thoroughly with warm water.
28
Replace the operating valve
→ Moisten the edge of the valve opening in the lid with
some detergent.
This makes it easier to replace the valve.
→ Place the operating valve on the lid diagonally.
→ Press the operating valve and turn it into the valve
opening.
Finally, check that the operating valve is placed correctly
by turning it.
The edges of the operating valve must lie flat at the top
and bottom of the lid (see figures).
10.3

Storing

→ Store the clean, dry Sicomatic® classic in a clean, dry
and protected place.
→ Do not close the cooker. You may place the lid upside
down on the cooker.