Silit Sicomatic classic Bedienungshinweise Seite 61

Checking the pressure indicator
→ Check the pressure indicator using your finger to see
if the aroma sealing cap moves.
→ At the same time, slide the slider back to the
position.
Checking the overpressure valve
If the overpressure valve is dirty or clogged, steam can
suddenly be released through the safety slot.
When using on gas hobs, the released steam can extin-
guish the gas flame, in which case gas continues to be
discharged uncontrolledly at the hob.
→ Check that the overpressure valve (1) moves freely.
→ Apply light pressure, e.g. using a wooden spatula, to
check that the ball can move (2).
This prevents steam from being released unexpectedly.
Checking the operating valve
If the operating valve is dirty or clogged, the overpres-
sure valve is activated.
→ Check the operating valve for dirt and correct position.
The edges of the operating valve must lie flat at the top
and bottom of the lid (see figures).
→ Clean the operating valve if necessary.
to prevent steam from being released unexpectedly
from the opening on the lid shaft handle.
Check safety bolt
If the handles are not aligned correctly, the red safety
bolt stops pressure building up in the cooker.
EN
13