Quick Start - Energetics E-205 Bedienungsanleitung

User Manual

Quick start

Quick Start Program
The computer is turned on by pressing any key or when the user starts to
pedal .
The display shows the travelled distance (DISTANCE), the workout time
(TIME), the calories used (CAL), the speed (KM/H), the output (WATT) and, the
current heart rate, if the hand pulse sensors are held (PULSE) .
Turning the selection button will adjust the resistance any time while train-
ing . The control panel will show the current resistance level (1 – 16) .
You can adjust the duration and intensity of your training as you desire .
!
Change to a different program
To change from the Quick Start Mode to another program, briefly
press the RESET-key. Then choose a program by pressing the
PROGRAM-key and enter your personal settings.
DISTANCE KM TIME CAL
KM/H WATT
PULSE
!
Reset all settings – RESET
To return the computer to the original position press the RESET-
key for 4 seconds, until you hear the beep tone and the original
values are displayed.