Safety Instructions - HBM ClipX Bedienungsanleitung

1

Safety instructions

Read this operating manual before operating the device for the first time. Any
persons assigned to install, commission, operate or maintain the device must
have read at least the sections of the operating manual of relevance to them.
The operating manual forms part of the product. Keep it in a safe place so that it
is permanently accessible to all users. If you pass the device on to a third party,
always pass it on together with the relevant documents.
Intended use
The ClipX amplifier system is to be used exclusively for measurement tasks and
directly related control tasks (automation systems). Use for any purpose other
than the above is deemed to be non-designated use. In the interests of safety,
the device should only be operated as described in the operating manual.
The device may only be powered by a safety extra low voltage (DIN EN 61558
or VDE 0570, Safety of transformers, reactors, power supply units and combina-
tions thereof). The supply voltage must be between 10 V and 30 V (DC).
Conditions at the place of installation
• Protect the device from direct contact with water.
• Protect the ClipX from moisture and dampness or weather such as rain,
snow, etc.
• Do not expose the device to direct sunlight.
• Please observe the permissible maximum ambient temperatures stated in
the specifications.
• The permissible relative humidity at 31 °C is 95 % (non condensing); linear
reduction up to 50 % at 40 °C.
• It is safe to operate the ClipX up to an altitude of 2000 meters.
Conversions and modifications
The device must not be modified from the design or safety engineering point of
view except with our express agreement. In particular, any repair or soldering
work on motherboards is prohibited. The device must not be opened. The prod-
ClipX
A04643_04_X00_03 HBM: public
Safety instructions
5