HBM ClipX Bedienungsanleitung Seite 123

Method
Save parameter
set.
Switch parame-
ter set.
Read OD.
Write OD.
1)
Supported data types are BOOLEAN, UINT8, INT8, UINT16, INT16, UINT32, INT32,
FLOAT, DOUBLE and STRING. Arrays are not supported.
ClipX
Function
The device settings
are saved in the
active parameter
set.
Switch the parame-
ter set.
Read from the
"Object dictionary"
on page 164.
Write to the "Object
dictionary" on page
164.
A04643_04_X00_03 HBM: public
Operation via Ethernet/OPC UA
Arguments
—
Parameter set
number
(Number of the
desired param-
eter set 1 ...
10).
Index
Subindex.
Index
Sub-index
Value.
Return values/Com-
ments
The return status "good"
merely signifies that the
function was successfully
started. The device takes
a few seconds to save,
and the save operation is
not separately confirmed.
The return status "good"
merely signifies that the
function was successfully
started. You can identify
the switching operation by
the "Changing parameter
set" bit in the system sta-
tus.
Value
The read value as data
type Variant. The actually
transmitted data type is
determined by the object
1)
being read .
Value is of data type Vari-
ant. But you have to spec-
ify the actual transmitted
data type. The type must
match the data type in the
1)
object directory .
121