Safety Instructions - HBM ME50S6 Bedienungsanleitung

Safety instructions

1 Safety instructions
In order to ensure sufficient immunity from disturbance only use Greenline
shielding (see HBM's special publication "Greenline" Screening Concept, elec­
tromagnetic compatibility of measuring cable, downloadable from the Internet
at http://www.hbm.com/Greenline).
The connection lines' (≤50 V) minimum insulation strength must be 350 V (AC).
Appropriate use
The ME50S6 with the connected transducers may be used for measurement
and directly related control and regulation tasks, only. Any other use is not ap­
propriate.
To ensure safe operation, the ME50S6 may only be used according to the
specifications given in this manual. When using the transducer, the legal and
safety regulations for the respective application must also be observed. The
same applies if accessories are used.
General dangers in the case of non‐observance of the safety instructions
The ME50S6 complies with the state of the art and is operationally reliable. If
the device is used and operated inappropriately by untrained personnel, resid­
ual dangers might develop.
Any person charged with device installation, operation, maintenance or repair
must in any case have read and understood the operating manual and the
safety instructions, in particular.
Conditions on site
Protect the device from moisture or atmospheric influences such as rain, snow,
etc.
4 ME50S6
A00260_04_Y00_01 HBM: public