HBM ClipX Bedienungsanleitung Seite 173

Operation via fieldbus
The values are set and read in a watch table (Extended Mode). In the following
example the currently displayed color of the system LED is polled (object
0x4200.6).
Fig. 59: Watch table after polling color of system LED (example)
In the example, the display is green (value 2, line 8 or 9) and valid, as no error
bit (line 7) is set.
In the following example an attempt is made to read a non-existent object.
Fig. 60: Watch table after polling a non-existent object
In the example, the error "Not found" (value 4 in line 7) is outputted.
In the following example effect 9 (rapid green flashing for 10 s) is set for the sys-
tem LED (object 0x4200.3).
ClipX 171
A04643_04_X00_03 HBM: public