Settings For Modbus-Tcp - HBM ClipX Bedienungsanleitung

Operation via fieldbus
DPV1
Slot Index
9 43
9 44
9 45
9 46
9 47
9 48
9 49
9 50
9.5.5

Settings for Modbus-TCP

Measured values and parameterization values have the format REAL
(floating point). This means two registers are required per value. So
to avoid inconsistent values, read or write the registers simultane-
ously when accessing.
First make the network settings in the browser depending on your network con-
figuration:
– DHCP server in network: Choose DHCP under Config Control.
– BOOTP server in network: Choose BOOTP under Config Control.
– No server in network: Choose Static IP Address under Config Control and
specify IP Address and Netmask (subnet mask). The Gateway setting is
optional, and depends on your network.
152
No of Data
bytes type
4 FLOAT
4 FLOAT
4 FLOAT
4 FLOAT
4 FLOAT
4 FLOAT
4 FLOAT
4 FLOAT
A04643_04_X00_03 HBM: public
R/W Description
RW User signal 3
RW User signal 4
RW User signal 5
RW User signal 6
RW User signal 7
RW User signal 8
RW User signal 9
RW User signal 10
ClipX object
directory
Sub-
Index
index
0x5003 3
0x5003 4
0x5003 5
0x5003 6
0x5003 7
0x5003 8
0x5003 9
0x5003 10
ClipX