Settings For The Fieldbuses; Settings For Profinet - HBM ClipX Bedienungsanleitung

Operation via fieldbus
9.5

Settings for the fieldbuses

The following sections set out the settings you need to make in your web
browser for the respective fieldbuses.
See also "Connecting a web browser to the ClipX" on page
ClipX using a web browser" on page
9.5.1

Settings for PROFINET

In your browser, specify the device name (Name of Station). The name must be
unique within the network. It may also be easier to specify the IP Address and
Netmask (subnet mask) there. Click on
You can also set both via your fieldbus controller. Carry out the further configu-
ration of the fieldbus using your PROFINET configuration tool.
Two DAPs (Device Access Points) are available to you for PROFINET:
• A "fast" DAP with a minimum cycle time of 0.25 ms and six free slots.
• A "slow" DAP with a minimum cycle time of 1 ms and 30 free slots.
Download the GSDXML file via your web browser's Device storage menu or
from the HBM website: https://www.hbm.com/ClipX. The Zip file on the HBM
website contains various different versions:
• GSDML-V2.33-HBM-ClipX-yyyymmdd.xml: The regular GSDML file for PN-
IO version (PROFINET stack) 2.33 in the latest release (Enter date in format
Year (y), Month (m) and Day (d); may require firmware corresponding to the
date).
• GSDML-V2.32-HBM-ClipX-yyyymmdd.xml: GSDML file for PN-IO version
2.32, if your configuration tool does not support more recent standards.
• GSDML-V2.31-HBM-ClipX-yyyymmdd.xml: GSDML file for PN-IO version
2.31, if your configuration tool does not support more recent standards.
132
84.
APPLY
A04643_04_X00_03 HBM: public
72, "Setting the
to activate the settings.
ClipX