HBM ClipX Bedienungsanleitung Seite 194

Operation via fieldbus
Subin-
Index
dex
0x4300 75
76
192
Function
Command "Write TEDS
data to file" (to device stor-
age). The filename is gener-
ated automatically, and is
located in object 0x4300:76
(next line). Any existing file
with the same name is over-
written.
The setting for use of TEDS
must be "TEDS required" or
"Use TEDS if available".
Filename for the TEDS data
according to the syntax
"IEEE1451_4_Manufactur-
erCode_ModelNum-
ber_VersionLetter_Version
Number_SerialNum-
ber.ted". The identifier "PD"
is used for the SerialNum-
ber 0. If no VersionNumber
is present, this identifier is
not applicable. If no file
could be generated, the
object is empty.
A04643_04_X00_03 HBM: public
Value
WO.
RO.
ClipX