HBM ClipX Bedienungsanleitung Seite 108

Starting up the ClipX
new object directory is generated each time prior to downloading so that it con-
tains the current status. As a result, the download takes several seconds.
You can also upload your own files to this area and download them back to your
PC or delete them.
Backing up device settings
Click on BACKUP. The ClipX creates a ZIP file. The file name is composed of
the device name, the UUID (serial number) and the current date, e.g.
ClipX_009043-20180424.zip. Depending on your browser setting, you are
prompted to select a folder, or the file is saved to your Download folder.
Restoring device settings
1. Click on REVERT
2. Activate all lines whose settings you want to load. To load everything, click
on Select all.
Network
•
address, subnet mask etc., as well as the settings for time (e.g. NTP)
and OPC UA.
General
•
bus (address and synchronization mode Master or Slave), the number
of the start parameter set, and the settings for parameter set switching
by the digital inputs (where specified).
Fieldbus
•
and BM40PB).
Password
•
encrypted form.
User management
•
Maintenance
of the
Visualization
•
Parameter set 01
•
the specific parameter set.
3. Click on REVERT
106
and specify the file containing the desired settings.
: Contain all the settings of the Ethernet port such as IP
: Contains the settings for TEDS usage, visualization, ClipX
: Contains all the settings of the active fieldbus (only BM40IE
: Contains the passwords being used for the user levels in
: Contains the settings (accessible menu items)
user level.
: Contains the settings for the
Parameter set 10
...
again.
A04643_04_X00_03 HBM: public
Visualization
: Contains the settings of
menu.
ClipX