HBM ClipX Bedienungsanleitung Seite 34

Electrical connections, LEDs
EtherNet/IP™ LEDs (MS, NS, only BM40IE)
MS
Status
LED
Off
off
Flashing
(1 Hz)
green
On
/
Flashing
red/
(1 Hz)
green
Flashing
(1 Hz)
red
On
NS
Status
LED
Off
off
Flashing
(1 Hz)
green
On
Flashing
/
(1 Hz)
red/
green
32
Meaning
The ClipX is not on.
Standby: The ClipX has not been configured.
The ClipX is running and error-free.
The ClipX is running a self-test.
Simple error: The ClipX has detected a reparable error, e.g.
an incorrect configuration.
Serious error: There is an irreparable error. Please contact
HBM; see "Technical support" on page
Meaning
The ClipX is not on, or has no IP address.
No network connection. But the ClipX has been assigned
an IP address.
The ClipX is connected to a network device, e.g. a switch.
The ClipX is running a self-test.
A04643_04_X00_03 HBM: public
235.
ClipX