HBM ClipX Bedienungsanleitung Seite 16

ClipX device types, scope of supply
3. BM40IE
You can operate this version with one of the interfaces for PROFINET
1)
erNet/IP™
using the software.
Fig. 1: The ClipX device types from left to right: BM40, BM40PB and BM40IE
To aid the design process, pre-compiled ePLAN macros (license-
free) and 3D-STEP files are available free of charge at
https://www.hbm.com/ClipX.
1)
EtherNet/IP™ is a trademark of ODVA Inc. For more information regarding ODVA, visit
www.odva.org.
2)
®
EtherCAT is a registered brand and patented technology, licensed by Beckhoff Automation
GmbH, Germany.
14
® 2)
, EtherCAT or Modbus-TCP. The interfaces can be switched
A04643_04_X00_03 HBM: public
®
, Eth-
ClipX