HBM ClipX Bedienungsanleitung Seite 167

The object dictionary is not the EtherCAT object dictionary. The Eth-
erCAT objects are only visible for the EtherCAT master.
Dynamic objects
Some objects are created or disappear during the runtime: The objects in the
range 0x5100 ... 0x57FF are dynamic objects which are dependent on the cre-
ation or deletion of calculated channels. The objects of the function block at
position 1 have the index 0x5101, those of the block at position 2 the index
0x5102 etc. The index of the objects in a block changes when you move it to a
different position.
Object list
You can download an (unsorted) object list for the current configuration via your
browser's Device Storage menu: "clipx_od.csv". The columns are separated by
semicolons. As a new list is generated for downloading, it takes a few seconds
for the process to complete and the download to start.
Example
Fig. 57: Example of an object list (excerpt)
Term Explanation
Idx Index (16 bit), 0x0000 ... 0xffff in hexadecimal format.
SubIdx Subindex (8 bit), 0 ... 255 in decimal format.
ClipX
A04643_04_X00_03 HBM: public
Operation via fieldbus
165