HBM ClipX Bedienungsanleitung Seite 76

Starting up the ClipX
Click on
red/green.
You can make two connections to the ClipX's web server simultane-
ously. Additional connections are also possible, e.g. via OPC UA.
The ClipX only uses IPv4; IPv6 is not supported.
Finding HBM devices in the network under MS Windows
If the Java Runtime Environment is installed on your PC, you can download the
"HBM Device discovery" Java program from the HBM ClipX web page
(https://www.hbm.com/ClipX) and unzip it. The program finds all ClipX devices
in the network, regardless of their address. Using the context menu for a device
(by right-clicking) and choosing Configure network setting you can change
the Ethernet settings, e.g. set an IP address or connect to the device (Open
web page).
Alternative options
If the method described above does not work or is not possible, in Windows 7 or
higher you can try the following (detect via UPnP):
1. Open Windows Explorer.
2. Click on Network.
3. In the Other devices section you should see the ClipX device (with the
device name, factory default ClipX) after a few minutes.
4. Double-click on the icon.
If you know the device's IP address, you can also type it in your browser's
address bar, e.g. http://192.168.0.234.
Android
Install one of the following apps from the Google Play Store if you want to con-
nect the ClipX using Android:
https://play.google.com/store/apps/details?id=com.hbm.devices.
scan.ui.android
74
and the SYS LED on the ClipX you are using will flash
A04643_04_X00_03 HBM: public
ClipX