14
Maintenance
The ClipX system is maintenance-free. You can download new firmware to the
device as necessary however – see
Important: You must not open the device.
Cleaning
•
Before cleaning, cut all connections, i.e disconnect the (push-in or screw-
type) plug terminals.
•
Clean the housing with a soft, slightly damp (not wet!) cloth. You should
never use solvents, since these could damage the labeling.
•
When cleaning, ensure that no liquid gets into the module or connections.
ClipX
"Updating the firmware" on page
A04643_04_X00_03 HBM: public
Maintenance
227.
237