HBM ClipX Bedienungsanleitung Seite 109

Starting up the ClipX
Saving (uploading) your own files to the ClipX, ClipX memory
Files that you have already uploaded, such as the working standard calibration
certificate, are displayed in this area, and you can choose to save the files on
your PC. Depending on your browser setting, you are prompted to select a
folder, or the file is saved to your Download folder. Select a file and click on
DELETE to remove the file from the ClipX memory.
Choose FILE UPLOAD to upload your own files, such as more calibration certif-
icates, to the ClipX. The file name must not contain any special characters
(umlauts) or blanks, only ASCII letters and numbers, dashes (-) and (under-
scores (_). At least one, and a maximum of 130, characters are allowed. The file
extension must comprise two to a maximum of four characters. You can upload
any file formats. If the upload did not complete correctly, because of insufficient
space for example, the failure is indicated at the bottom of the browser window
and any storage space already occupied by the file is freed up again.
ClipX 107
A04643_04_X00_03 HBM: public