Health-Monitoring, Leds - HBM ClipX Bedienungsanleitung

Electrical connections, LEDs
6.4

Health-Monitoring, LEDs

There are 1 to 3 LEDs on the front, depending on the device type. On the
BM40IE the LEDs have different meanings, indicated by differing labels,
depending on the fieldbus.
Fig. 9: Assignment of the LEDs to the interfaces on the BM40IE and BM40PB.
The BM40 only has the system LED.
The following tables list the states indicated by the LEDs. The LEDs flash about
once a second in flash mode, and about five times a second in rapid-flash
mode.
26
A04643_04_X00_03 HBM: public
ClipX