HBM ClipX Bedienungsanleitung Seite 183

Subin-
Index
dex
0x4428 1
0x4428 2
0x4428 3
0x4428 4
0x4428 5
0x4428 6
0x4428 7
ClipX
Function
FIFO control flags, deter-
mine the mode of operation
of the FIFO and contain
error information.
Number of values in FIFO,
level.
Trigger definition to fill the
FIFO, bit mask Low word
(32 bit).
Trigger definition to fill the
FIFO, bit mask High word
(32 bit).
Indication for which FIFO
channel the specifications in
subindex 6 and 7 are to
apply.
Minimum difference value
for FIFO channel 1 ... 6
(with difference trigger).
This difference between the
last value stored in the FIFO
and the current value must
be exceeded in order to add
an entry for all 6 signal
sources. You must set all 6
difference values >0 so that
the difference trigger
becomes active.
Selection of the signal
source for FIFO channel 1
... 6
A04643_04_X00_03 HBM: public
Operation via fieldbus
Value
See FIFO control flags
0 ... 1000 (4000 from firmware
2.0), UINT32, RO.
32
0 ... 2 -1, see "Digital flags:
List of I/O flags (I/O status)" on
page 162, UINT32.
1 ... 6, UINT8.
<0: Difference trigger deacti-
vated
>0: Difference value, FLOAT.
0 ... 31, see "List of signal ref-
erences" on page
table.
222, UINT8.
181