Electrical connections, LEDs
Grounding
Important: You must ground the support rail on which you mount the
ClipX. If you want to mount the ClipX in a different way, such as on a
wall, you must ground the housing by way of the mount.
6.3
Available connections and LEDs
Fig. 8:
Locations of the connections and LEDs; the connector designations X1
to X7 are imprinted on the housing; for meanings see table.
No.
Description
1
X1: Ethernet port
2
X2: Power supply, Digital I/O, ClipX bus
3
X3: Analog output
4
X4: Transducer connection, TEDS
24
A04643_04_X00_03 HBM: public
ClipX