HBM ClipX Bedienungsanleitung Seite 222

Operation via fieldbus
Subin-
Index
dex
0x6123 1
0x6124 1
0x6125 1
0x6130 1
0x6138 1
0x6139 1
0x6140 1
0x6150 1
0x61A0 1
220
Function
Analog input scaling 2 phys-
ical value.
Analog input offset.
Analog input autozero.
Analog input process value.
Tare zero.
Analog input autotare.
Analog input net process
value.
Analog input status.
Analog input filter type.
A04643_04_X00_03 HBM: public
Value
Scaling value 2 in the unit of the
physical variable, FLOAT.
Zero value (offset) in the unit of
the physical variable, FLOAT.
Zero balancing.
Writing 0x6f72657a to this
object sets the gross measure-
ment value to 0, UINT32, WO.
Gross measurement value in
the unit of the physical variable,
FLOAT, RO.
Tare value in the unit of the
physical variable, FLOAT.
Tare.
Writing 0x61726174 to this
object sets the net measure-
ment value to 0, UINT32, WO.
Net measurement value in the
unit of the physical variable,
FLOAT, RO.
Supported:
0: Invalid
3: No sync signal
4: TEDS-fault
5: TEDS available, UINT8, RO.
Supported:
0: Filter off
3: Bessel low-pass filter
4: Butterworth low-pass filter,
UINT8.
ClipX