HBM ClipX Bedienungsanleitung Seite 200

Operation via fieldbus
Subin-
Index
dex
0x5010 5
0x510n 1 ... x
In the following tables n is used to signify the position of the block.
Unused outputs are assigned the value 48 by default (see
ences" on page
in order to use it in another calculation.
198
Function
Error bits of the calculated
channel.
Parameters of the block at
position n (1 ... 6), see fol-
lowing tables.
222). You can also use the value to free up an assigned output
A04643_04_X00_03 HBM: public
Value
0: No error
1: Insufficient parameter stor-
age
2: Insufficient storage space in
the dynamic object dictionary
4: No further instances of this
block type allowed, UINT16,
RO.
The numbers, types and mean-
ings of the parameters depend
on the block type.
"List of signal refer-
ClipX