Setting The Clipx Using A Web Browser - HBM ClipX Bedienungsanleitung

Starting up the ClipX
When connecting via the fieldbus interface, you can enable the Maintenance or
Administrator user level directly for the browser by one command, without
entering a password. When doing so, you must specify a time for which the
password deactivation is to apply, up to a maximum of 24 hours. You can also
disable the selected user level prematurely, or extend the time period. The
active user level is also available in the browser as from the time of switching
and for the specified period of time, and is displayed accordingly. The setting via
the fieldbus has priority over any setting made in the browser.
See "Object dictionary" on page 164.
For the connection via the fieldbus itself you do not need a password; all func-
tions are always accessible there.
7.4

Setting the ClipX using a web browser

Click on to switch language.
You make all the settings for sensors and signal processing in your browser.
You can view help on each topic by pressing F1 or clicking on . Click on to
make the SYS LED of the ClipX being used flash red/green if you have con-
nected multiple ClipX devices.
The start screen of the ClipX displays the current measured values (gross and
net signals), peak and captured values, the status of the limit value switches
and the digital inputs and outputs, as well as the values of the calculated chan-
nels and the values transmitted over the bus systems. If no valid values are
received from one of the data sources, INVALID is displayed.
The net signal (default) is additionally displayed in graph form. Click on the sig-
nal name to display a different signal (the setting is not saved). It is not currently
TEDS
possible to change the display rate or the scaling. is additionally dis-
played if the transducer has a TEDS module and it has been successfully read.
84 ClipX
A04643_04_X00_03 HBM: public