Other Mounting Options - HBM ClipX Bedienungsanleitung

5.3

Other mounting options

Instead of using a support rail, you can mount the ClipX on a wall, for example,
using an appropriate bracket. To do so, make a mounting bracket to fit on the
back of the ClipX.
Important: The vents on the back must not be covered over. The min-
imum clearance between the back of the device and a wall in the area
of the vents is 8 mm.
Fig. 5: Screws to remove the support rail mount
ClipX
A04643_04_X00_03 HBM: public
Mounting
19